Technical Building Control
Your challenges
Essential for guaranteeing the solidity of a structure and the safety of future occupants, technical building control (CTC) is a major human and material challenge.
This approach makes it possible to anticipate, as far upstream as possible, any technical hazards associated with a construction, renovation, conversion or refurbishment project, and to ensure that the building complies with local regulations.
This inspection can be carried out on a voluntary or regulatory basis. It is mandatory in most countries, notably to comply with insurance requirements.
This approach makes it possible to anticipate, as far upstream as possible, any technical hazards associated with a construction, renovation, conversion or refurbishment project, and to ensure that the building complies with local regulations.
This inspection can be carried out on a voluntary or regulatory basis. It is mandatory in most countries, notably to comply with insurance requirements.
Contact us ?
Don't hesitate to contact us, for all of your demand in inspection, tests and measurments, consulting and technical support, certification and training.
Apave solutions
in Asia
From the design phase onwards, Apave's teams in the Middle East work with you to ensure the strength, reliability and safety of your structures, and to manage all technical risks with the utmost precision.
The multi-sector expertise of our teams enables us to work on all types of structures: mosques, ERP, tertiary buildings, residential buildings, high-rise and very high-rise buildings, industrial buildings, airports, shopping centers, hospitals...
We can carry out technical inspections in the pre-project phase, to validate the conformity of your future structures right from the design stage, and prevent any technical problems that may arise during construction. Our teams can also intervene after the fact, on existing structures, to check the solidity of the building (following the detection of wear, cracks or other anomalies, for example).
At the client's request, we can offer a range of complementary services: control insurance, design review, technical assistant during design, feasibility studies, construction materials, risk analysis, project management, material consistency, green building certification, asset management, sustainability for the building...
Depending on your needs and the specifics of the project, CTC can cover all types of risk: technical, human, environmental, seismic, thermal, acoustic, performance of installations, accessibility for the disabled...
The multi-sector expertise of our teams enables us to work on all types of structures: mosques, ERP, tertiary buildings, residential buildings, high-rise and very high-rise buildings, industrial buildings, airports, shopping centers, hospitals...
We can carry out technical inspections in the pre-project phase, to validate the conformity of your future structures right from the design stage, and prevent any technical problems that may arise during construction. Our teams can also intervene after the fact, on existing structures, to check the solidity of the building (following the detection of wear, cracks or other anomalies, for example).
At the client's request, we can offer a range of complementary services: control insurance, design review, technical assistant during design, feasibility studies, construction materials, risk analysis, project management, material consistency, green building certification, asset management, sustainability for the building...
Depending on your needs and the specifics of the project, CTC can cover all types of risk: technical, human, environmental, seismic, thermal, acoustic, performance of installations, accessibility for the disabled...
Fast, reliable local support
in Asia
Apave is an international group specialising in risk management, with over 150 years of experience.
Every day, Apave's 16,500 employees collaborate with customers to help them protect what they value most: their employees, customers, and assets. Apave offers services and expertise in five key areas: inspection, training, testing and measurements, certification and labeling, and consulting and technical support.
Our teams consist of highly qualified and experienced experts. Thanks to their advanced technical expertise and in-depth knowledge of local regulatory frameworks, they perform reliable and precise technical inspections, considering the specific requirements of the country, sector, and building involved.
Whether it concerns personal safety, site safety and compliance, environmental safety, or digital security, Apave’s mission is always to be a trusted third party for its customers.
Your questions
about our Technical Building Control assignments
-
Why carry out a technical building inspection (CTC)?
In the vast majority of countries, technical building inspections are first and foremost a regulatory requirement. Very often, CTC is also a formality required by insurers (as is the case in Saudi Arabia). Beyond its regulatory nature, technical building inspection is an essential step in guaranteeing the safety of future users, as well as the solidity and conformity of the structure, with respect to the standards in use in the country and for the building concerned (thermal, acoustic, earthquake, environmental standards, accessibility for the disabled...). It is therefore imperative not to overlook this inspection, whatever the structure and type of project. -
What types of buildings can you inspect?
Thanks to our multi-sector expertise and agility, we are able to work on all types of structures, of all sizes, types and uses (commercial buildings, residential buildings, industrial sites, ERP, infrastructures, engineering structures, etc.). Examples include high-rise and super-high-rise buildings; mosques; warehouses; factories; retail outlets; residences; hospitals; airports... We can also support you in all types of projects: (construction, renovation, rehabilitation or transformation), throughout their lifecycle. -
At what stage of the project can you intervene?
We can intervene both during the design phase of a new structure and later, on existing buildings, when an anomaly is detected. However, we strongly advise you to call in a technical inspector as early as possible in the pre-project phase. This is the surest way of controlling all technical risks and anticipating any hazards, bottlenecks or malfunctions. -
How does a building inspection work?
After gathering the necessary documents, we examine the design file to ensure that the project complies with the regulations in force in the country and for the type of building concerned. We then draw up an initial technical inspection report.
During the construction phase, the technical inspector carries out all the usual checks on the building (framework, enclosure, equipment, electrical and thermal installations, fire safety, etc.). Then, one year after completion of construction, another visit is made to carry out a final assessment. -
Can you take samples and perform analyses on site?
Yes, we can. In Saudi Arabia and other Middle Eastern countries, we have the laboratories and resources to carry out in situ analyses. If necessary, we can drill and take samples to ensure that soil conditions are adequate and in compliance with current regulations. -
In which cities in the Middle East can your teams operate?
The Apave Group has branches in several Middle Eastern countries (Kuwait, Turkey, Oman, United Arab Emirates, Qatar, Saudi Arabia, etc.). This solid territorial footing, combined with the high mobility of our teams, enables us to operate throughout the region in a highly responsive way, whether in small outlying towns or in major cities (Istanbul, Ankara, Dubai, Al Ahmadi, Muscat, Abu Dhabi, Doha, Riyadh...).
Our other services
Our strengths
OUR CUSTOMER RELATIONSHIP APPROACH
Apave, an expert in risk management, makes it a point of honour to provide ever-higher quality services. The commitment of our customers is testimony to this. As a trusted third party, Apave intends to meet the growing expectations of its customers and create mutually beneficial relationships internationally.
OUR EXPERTISE
Our teams have cutting-edge technical and regulatory expertise. We are a globally accredited inspection body (ASME, PED, IBR, MHLW, CRN, DOSH, MOM, etc.). Thanks to our expert engineers, Apave is involved throughout your project to ensure the best possible risk assessment, through inspection, training, certification, testing and measurement, and technical advice and support.
OUR CORE VALUES
Apave has not only a strong safety culture, but also values that form a common foundation shared by all Group employees: customer focus, independence, professionalism, integrity and respect. These values are present at all levels, both in our in-house training and in the services we provide, with a single objective: quality.